MxToolbox Use Cases: Webserver Setup

Setting up a Web Server

Setting up a webserver for a new or existing domain can be a fairly trivial task with the right tools.  An administrator needs to balance configuring web server software, DNS setup, load-balancing, redundancy, and firewalls.  Here are few tools that might simplify your setup process:

Pre-Check

  1. Run a blacklist check on the IP addresses that you plan to use for your web server.  A blacklisted IP address should not be used for mail servers or web servers as this is an indication of potential fraudulent or spammer activity.

Verifying Setup

We’ll pick-up after you have assigned the IP addresses, and installed the OS and web server software.  From there you will want to verify that your server is up and running and accepting HTTP or HTTPS connects:

  1. Run an HTTP or HTTPS test on each IP that will accept email.  This will perform several tests against your server and give you results on your web configuration. HTTPS tests add a few additional areas related to configuration of the secure socket layer, including certificate checks.

Verifying DNS Setup

  1. Check that you have properly configured A records for the server(s).

On-going Server Maintenance

  1. Setup a web monitor on each IP that will serve as a web server.  This will perform several tests against your server and give you granular results on the status of your HTTP or HTTPS configuration.

Today, almost every online service runs off an HTTP or HTTPS backend.  Knowing that your services are up and running is incredibly important.  With MxToolbox Monitoring solutions, you can be sure that your services are up and performing while you concentrate on making them even better.